Set Huawei E3372h from hilink to stick mode: Unterschied zwischen den Versionen
Aus Markus' Wiki
Markus (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „== Problem == Problem: The Huawei LTE Modem E3372h is a dual mode modem and needs to be switched into the hilink mode. This is particularly important when us…“) |
Markus (Diskussion | Beiträge) |
||
| Zeile 29: | Zeile 29: | ||
FF - Dummy (disable modeswitch when using this as the initial mode?) | FF - Dummy (disable modeswitch when using this as the initial mode?) | ||
</pre> | </pre> | ||
| + | |||
| + | == See also == | ||
| + | * http://www.wirelessinfo.be/index.php/mikrotik/pages/3g | ||
== References == | == References == | ||
* Source: https://forum.mikrotik.com/viewtopic.php?t=89458 | * Source: https://forum.mikrotik.com/viewtopic.php?t=89458 | ||
Version vom 27. Juni 2017, 00:21 Uhr
Inhaltsverzeichnis
1 Problem
Problem: The Huawei LTE Modem E3372h is a dual mode modem and needs to be switched into the hilink mode.
This is particularly important when used with a Mikrotik RB951 Wifi router.
2 Fix
The original mode was: AT^SETPORT="A1,A2;12,1,16,A1,A2" I set the modem to: AT^SETPORT="FF;12,1,16" usb power reset, and it started working as a PPP interface. ------ I found theese settings using AT^SETPORT, and AT^GETPORTNAME: AT^SETPORT="initial_mode;normal_mode" map: 1 - Mobile Data Modem (MDM) 5 - GPS interface 6 - control interface 12 - PC UI 10 - modem? 16 - NDIS A1 - Virtual cd A2 - TF card reader FF - Dummy (disable modeswitch when using this as the initial mode?)
